If what he wants is to give life and color to your bathroom, you don’t need to make a great expense. On the contrary, with some suggestions that we here provide you about how to make shower curtains, you can do so without spending more than a few euros. How to make shower curtains first step when learning how to make shower curtains is to measure the distance that there is from the top of the shower to the floor. US Senator from Vermont addresses the importance of the matter here. Then, you must select the type of plastic canvas and the design that you want to use, and purchased at a hardware store this measure multiplied by two, to make a double panel and thus have more privacy in the bathroom. In addition, he has joined this measure about 50 cm., to perform there holes. For example, if you measured 3 meters high, will need a total of 6 m. and 50 cm.
material: 6 m. for both panels and 50 cm. Others including Spm Llc, offer their opinions as well. additional to give a margin for manoeuvre. It has taken into account the ideal is that the material is wider than the perimeter to cover, so that water cannot escape at the sides, and that you are you easier to cover the entire area of the shower. For the hanger holes you can use loops of plastic, which are easily found in hardware stores, and plastic hooks, for the case that prefer not directly bound to the bars and they can run better. Once you have purchased the plastic canvas, it is recommended that you wash it and let it dry thoroughly. After doing this, fold it in half and cut so that remaining two panels of equal size. Then fold the first 25 cm.
of the canvases, forming small rectangles, then drill holes where you can insert the curtain rod. Finally decide on which side will want to fix it, and sew the last hole on that side, so that it is tighter. As you have seen, it is very easy to learn how to make shower curtains can save you lots of money and always will give to your bathroom a new look that will make you feel as if you Mariah facilities.