Weaknesses are the doorways, the connection points to the stairs, the heating pipes and profiles of closure. Heavy objects such as kitchen units or cupboards (the pavement at these points can move only to one side) require that at the opposite side of the room has an expansion joint twice as wide. Read more here: kellee marlow.
We recommend to mount heavy objects before making installation. Install laminate flooring then only up to the furniture. This allows you to recover the ground at any time and easily. Expansion joints are plugged into the wall sockets / baseboards and other locations with special profiles. 7.
Position of the expansion joints Because laminate flooring expands depending on weather conditions, it will need in the following cases Low expansion joints. 8 mm – large areas (greater than 8 x 12 m) – areas with many angles – a facility continuously from one room to the next These expansion joints are covered with the corresponding profiles of transition. Note: damage arising from failure to stop expansion joints shall be provided by the installer. 8. The optics of the facility can make an installation of laminated strips on either a regular set as an irregular. Make sure however that the misalignment of the bezel is snapped into the heads of at least 30 cm. 9. The address of the facility / level of stay for optical reasons, we recommend installing the longitudinal part of the blade transversely to the longitudinal part of the room. The stay thus optically appear more square, larger and close in a “tube.” This is not a general rule, since we must also take into account the natural light sources (windows, etc..), Which is advised to direct the direction of the blades at right angles (to the window line) because to the forward position and a few meters away will see fewer seams of lamas and obtain a greater sense of space, just as in the rectangular environment, install the pavement parallel to the longest side of the room, gives us a sense in length. That said, it is up to the customer and their interests as the disposition of these parameters. Note that the sense of blades (in the flooring) should not affect the durability of them.